skip to main text

Setting Items for Copying

You can change the copy settings such as magnification and intensity.

Print Settings Screen

The following screen is displayed by selecting Settings in the Copy standby screen.

Preview

When Preview is displayed on the print settings screen, selecting Preview allows you to preview an image of the printout on the preview screen.

For details, see below.

Setting Items

Flick to display setting items and select the setting item to display the settings. Select to specify the setting.

Note

  • Some settings cannot be specified in combination with the setting of other setting item. If the setting which cannot be specified in combination is selected, appears on the touch screen. In this case, select on the upper left on the touch screen to check the message and change the setting.

  • The settings of the page size, media type, etc. are retained even if the printer is turned off.

  • When copying starts in the copy setting that is not copied, The specified function is not available with current settings. is displayed on the touch screen. Change the setting, following the on-screen instructions.

Following setting items can be changed.

  • Intensity

    Specify the intensity.

    • A: Select to activate/deactivate automatic intensity adjustment.

      When ON is selected, the intensity is adjusted automatically according to the originals loaded on the platen.

    • B: Drag to specify the intensity.

      Note

      • When you select ON in the automatic intensity adjustment, the loading documents cannot be loaded in the ADF (Auto Document Feeder).

  • Magnif. (Magnification)

    Specify the reduction/enlargement method.

  • Paper src

    Select a paper source (Rear tray/Cassette 1/Cassette 2/Auto) where paper is loaded.

    Note

    • When Auto is selected, paper is fed from the paper source where the paper that matches the paper settings (page size and media type) is loaded.

  • Page size

    Select the page size of the loaded paper.

  • Type (Media type)

    Select the media type of the loaded paper.

  • Print qlty (Print quality)

    Adjust print quality according to the original.

    Important

    • If you use Economy with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.

    • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

  • Layout

    Select the layout.

  • ADF duplex scan

    Select whether to perform duplex scanning from the ADF.

  • 2-sidedPrintSetting

    Select whether to perform two-sided copying.

  • Collate

    Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

  • Frame erase copy

    When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows.

  • ID card copy

    You can copy both sides of a card sized original such as an ID card onto a single sheet of paper.